Caged Bearings with Race Washers - Pair - STAINLESS STEEL for 1/4"or 3/16" Pivot

In stock
Shelf Location
100% of 100
Bulk Discounts
  • Buy 5 for $2.59 each and save 43%
  • Buy 10 for $2.30 each and save 50%
  • Buy 50 for $2.02 each and save 56%
  • Buy 500 for $1.73 each and save 62%
Write Your Own Review
You're reviewing:Caged Bearings with Race Washers - Pair - STAINLESS STEEL for 1/4"or 3/16" Pivot
Your Rating
Customer Reviews

1 Item

Show per page
  1. I wish you also put these measurements in mm as well. Some of of us struggle with inches
    General Rating
    It sounds good a product for liner lock s

    Review by Nkosi

    Posted on

1 Item

Show per page

1/4" ID Ball Bearings with Race Washers Bearing:

Stainless steel cage with 9 hardened stainless ball bearings

Caged Bearing Dimensions:

.251" ID

.416" OD

.0625" thick

Race Washer Dimensions:

Hardened SS to 61HRC

.053" thick ( race washer and caged bearing together is .110" thick )

.473" OD

.204" ID

Sold as a set. includes 2 bearings and 2 race washers.

Use these bearings in larger folders.

When just the bearing is used, they will fit a 1/4" pivot. If combined with the races, the bearing/race combo will easily fit a 3/16" pivot.

NOTE: When milling a pocket for these in the handle or blade or both, the main concern is the outer diameter. The ID does not have to snug up against the pivot. The pocket will hold the bearing in place perfectly.

The race washers are hardened and have a groove that will perfectly fit the roller balls. If you are using a loose bearing set up and having to break in the ball groove, using these races will eliminate that step. You don't have to use the races to work with these bearings.