Caged Bearings with Race Washers: for 1/8" Pivot
- Buy 5 for $3.71 each and save 10%
- Buy 10 for $3.30 each and save 20%
- Buy 50 for $2.88 each and save 30%
1/8"+ ID Ball Bearings with Race Washers Bearing:
Stainless Cage with 7 ball bearings
.132" ID
.262" OD
.047" thick
Race:
Hardened SS to 61HRC
.048" thick
.276" OD
.125" ID
Sold as a set. Each set includes 2 bearings and 2 race washers.
Use these in small gent size folders or balisong knives. We have one size slightly smaller than this one. Use this bearing set where you want just a bit more size to it.
These will fit a typical 1/8" barrel pivot.
NOTE: When milling a pocket for these in the handle or blade or both, the main concern is the outer diameter. The ID does not have to snug up against the pivot. The pocket will hold the bearing in place perfectly.
The race washers are hardened and have a groove that will perfectly fit the roller balls. If you are using a loose bearing set up and having to break in the ball groove, using these races will eliminate that step. You don't have to use the races to work with these bearings.