Bushcraft Blank D2 Hot Rolled, 8.5" long, .14" thick
In stock
SKU
BBKB-KMS-103
Shelf Location
H3.2
$33.00
Bulk Discounts
- Buy 3 for $31.35 each and save 5%
Bushcraft design D2 Steel
8.5"OAL x 1"W
.14" thick
2qty - 7/64" Pin holes
2qty - 3/16" Pin holes
3/16" Lanyard hole
D2 is a high carbon, high chromium content steel that is considered “semi-stainless”. D2 is more corrosion resistant than other High Carbon Steel. It still has great wear resistance and toughness.
Note: These blanks will need to be heat treated. Heat Treat table below.
| Heat Treatment of D2 Steel | ||||||
| AISI | Preheat Temp. (1) | Austenitize Temp. (2) | Hold Time (Minutes) (3) | Ouench | Temper Temp.(6) | Typical Hardness HRC |
| D2 | 1400/1450 | 1825/l875 | 15 45 | AIR | 400/1000 | 55/62 |
Write Your Own Review
We found other products you might like!
-
Carbon Fiber & Orange G10 3/16" - Knife Handle MaterialStarting at $27.74
-
G10 Liner - UltreX™ Hunter Orange .030 & .060 - Knife Handle MaterialStarting at $2.26
-
Rod - Stainless Steel 416 Rod - PinstockStarting at $0.85
