G10 Liner - UltreX™ Hunter Orange .030 & .060 - Knife Handle Material

In stock
SKU
HMSL-G10-UL-HunOr-
Shelf Location
C3.7
Grouped product items
Product Name Qty
G10 Liner - UltreX™ Hunter Orange .030" x 1.5" x 6" Pair of Scales
$2.04
Bulk Discounts
  • Buy 2 for $1.94 each and save 5%
  • Buy 3 for $1.84 each and save 10%
G10 Liner - UltreX™ Hunter Orange .030" x 6" x 12" Sheet
$8.15
G10 Liner - UltreX™ Hunter Orange .030" x 12" x 12" Square
$13.97
G10 Liner - UltreX™ Hunter Orange .030" x 12" x 24" Rectangle
$24.45
G10 Liner - UltreX™ Hunter Orange .060" x 1.5" x 6" Pair of Scales
$3.41
Bulk Discounts
  • Buy 2 for $3.24 each and save 5%
  • Buy 3 for $3.07 each and save 10%
G10 Liner - UltreX™ Hunter Orange .060" x 6" x 12" Sheet
$13.64
G10 Liner - UltreX™ Hunter Orange .060" x 12" x 12" Square
$23.39
G10 Liner - UltreX™ Hunter Orange .060" x 12" x 24" Rectangle
$40.39
Write Your Own Review
You're reviewing:G10 Liner - UltreX™ Hunter Orange .030 & .060 - Knife Handle Material
Your Rating

UltreX™ G10 Liner

- Hunter Orange

- come in .030 and .060 scales, sheets, 12x12's, and 12x24's


This g10 is .030" or .060" thick and used as liner or spacer in your knife handles.

It is called a liner when used on a full tang knife and sandwiched between a scale and the tang.

It is called a spacer when stacked in line in a full tang knife.

When it is used in a folder between the scale and metal liner it gets confusing. Call it a g10 liner.

The advantage to this material is it doesn't absorb water and comes in a wider assortment than traditional vulcanized liner material.



TIP: This is g10 and needs to be really roughed up for glue to stick to it. Use a 36 or 40 grit abrasive and scratch every bit of you can for a good bond.