U-Weld-Grinder Frame - Bare Bones Kit

In stock
Only 1 left
SKU
GS-UWG-Frame
Shelf Location
Location?
$425.00
Write Your Own Review
You're reviewing:U-Weld-Grinder Frame - Bare Bones Kit
Your Rating

U-Weld-Grinder- Frame Only

  • This kit must be welded together. We also sell a welded and painted version of this kit for an additional $50, named the KnifeDogs Grinder.
  • This bare-bones frame kit is designed to be a low-cost option for a 2nd grinder frame using your already existing tool bars (1.5" square).
  • You can purchase any additional parts separately to make this a dedicated machine. These include: adjustable tool rest, contact wheels in all popular sizes, small wheel adapter, tool arms, small wheels, slack/flat platen attachment, and 12" mounting kit.
  • This does not come with a motor or speed controller, It also does not come with any tool bars, contact wheels or platen. The motor mount will fit a 56c faced motor. This bare-bones kit is just for the bare minimum frame so you can use your own accessories using 1.5" tool arms.  
  • Additional tools needed: clamps, step drill bit, welder
  • NOTE:
    This kit does not come with a motor or speed controller. It also does not come with any tool bars, contact wheels, or platen. The motor mount will fit a 56c faced motor. This bare-bones kit is just for the bare minimum frame so you can use your own accessories using 1.5" tool arms.

This kit contains:

  • a tilting frame
  • drive & tracking wheels
  • gas strut
  • handle
  • "star" metal cutouts
  • metal hardware

Download PDF - Welding And Assembly Instructions for U-Weld-Grinder 

INCLUDED:
Main motor plate (56c) 1
Tool bar cage plate 1
Tool bar holders 3
Drive wheel 5/8" bore 1
Tracking Wheel 1/2" bore 1
Vertical support bracket 2
Arc swivel bracket 2
Tension arm 1
Tension arm swivel brackets (2ea) 2
Tension arm Handle 1
Star handles 3
Swivel tracking block(Alum) 1
Gas strut (60lb) 1
1/2”-13 Nuts 7 weld on frame (6) and tension (1)
1/2”-13 Lock nuts 3 tracking wheel(1), frame pivot bolts (2)
1/2”-13 Bolt x 1” 3 star handle (3)
1/2”-13 Bolt x 1.5” 2 pivot bolts in arc bracket
1/2” Machinery bushings 4 2ea per side on tracking and drive wheels
3/8”-16 Bolt x 1” 2 arc swivel channel
3/8”-16 Lock nuts 2 arc swivel bolts
3/8” Washers 10 arc swivel bolts (6) & motor mount (4)
3/8”-16 Bolt x 3/4” 4 motor mount
1/4” SS pin x 5” 1 Pin to hold grinder in vertical position
1/4”-? Bolt x 3” 1 swivel block pivot
1/4” Washers 4 swivel block assembly
1/4” Lock nut 1 swivel block pivot bolt
1/4" x 5" SS rod 1 index pin
 

**Note: With this being an in-house item, there may be some additional build time and may require up to a week to complete.  If we are out of stock, please call or email us to get estimated build time.