Tri Lug Pivot Head, .375" Head Dia, 8-64 Thread, .17" Thread Length, Stainless Steel
- Buy 2 for $3.29 each and save 5%
- Buy 5 for $3.11 each and save 10%
- Buy 10 for $2.94 each and save 15%
- Buy 15 for $2.77 each and save 20%
- Buy 25 for $2.60 each and save 25%
- Buy 50 for $2.42 each and save 30%
Tri Lug Pivot Head
Tri Lug Pivot Head
TORX T-15 drive
.375" Diameter head
.09" Head Thickness
8-64 Fine Pitch Thread
.17" Thread Length under the head
Made of Staineless Steel
Made in the USA all the way!
The 64tpi on these allows a much finer adjustment when dialing in your knife build.
This is a part of a three part pivot system. You use two heads and pivot barrel. We would also suggest adding a bushing to the barrel to fit blade/washer stackup perfectly. Some makers prefer a fancy pivot head on one side and a traditional screw head on the back side. We will also have button head screws in this fine pitch in #8 and #6 sizes in both stainless and titanium to fit one side of the knife.
These disc pivots were designed to go with our #8-64 thread Pivot Barrels.
We have a few lengths of pivot barrels available that fit this pivot head:
Pivot Barrel, Fine Pitch, Stainless Steel, 1/4"D x .280"L, 8-64 Thread
Pivot Barrel, Fine Pitch, Stainless Steel, 1/4"D x .375"L, 8-64 Thread
Pivot Barrel, Fine Pitch, Stainless Steel, 1/4"D x .500"L, 8-64 Thread
We can make custom pivots like these to your design or specifications in batches of 500 or more. Call for more information.
Note: Pictured are muliple Pivots. You are purchasing one single Pivot. If you want the Pivot head on both sides of your knife, order 2.
