Pivot Barrel, Fine Pitch, Stainless Steel, 3/16"D x .280"L, 6-64 Thread
- Buy 2 for $2.57 each and save 12%
- Buy 5 for $2.43 each and save 17%
- Buy 10 for $2.30 each and save 21%
- Buy 15 for $2.16 each and save 26%
- Buy 25 for $2.03 each and save 30%
- Buy 50 for $1.89 each and save 35%
416 Hardened Stainless Steel
3/16"D x .280"L
Made in the USA all the way!
This is a three part pivot system. You use two heads and pivot barrel. We would also suggest adding a bushing to the barrel to fit blade/washer stackup perfectly. Some makers prefer a fancy pivot head on one side and a traditional screw head on the back side. We will also have button head screws in this fine pitch in #8 and #6 sizes in both stainless and titanium to fit one side of the knife.
These pivot barrels were designed to go with our Disc Pivots. We have one available (click here)
We also have #6-64 screws that go with these pivot barrels:
Note: Pictured is one individual pivot barrel and one complete pivot barrel with two disc pivots. You are purchasing one single pivot barrel.