Rocklinezer Carbidizer

Knife Maker's Package

The Knife Guide is designed for a uniform and controllable tungsten carbide deposit ( within .0001”) on all types of blade edges.

ROCKLINIZER Model 380 AKM
(110-120 volt, 50-60 Hz., 1 phase A.C.) (220-240 volt also available)
(Titan Technologies HEKE™ High Endurance Knife Edge System) Patent Pending by George Lambert
#9207-A Tool Post Applicator
#9208 Tool Post Holder and Knife Guide
#9250-A Applicator

ELECTRODES AVAILABLE FOR ROCKLINIZER Model 380 AKM
#8245 Tungsten Carbide (Hollow) 3/32" dia. x 2"
#8247 Tungsten Carbide (Hollow) 1/8" dia. x 2"
#8249 Tungsten Carbide (Hollow) 3/16" dia. x 2"

380AKM KNIFE MAKER MODEL

The Rocklinizer Carbide Application Process is now customized to provide the ultimate wear protection for knife and blade edges.

How It Works
Rocklinizer 380AKM Knife Maker's Model
Tungsten carbide applied to one side of a sharpened blade provides a “self-sharpening” edge akin to the Beaver Tooth effect. The dentine wears away faster than the enamel as the Beaver’s lower jaw works against the upper jaw. This hard-soft differential hardness causes the knife edge to become more aggressive as it is used.

Many knife makers eliminate the need for heat treatment as softer metal blades can now be upgraded by applying the hard and wear resistant carbide surface to only one edge.

Alternatively, tungsten carbide can be applied to both edges of a knife blade for wear protection.

The amount of carbide deposit can be precisely controlled
to match the bevel of the edge.

This unique deposition process retains sharpness longer and resists rust and corrosion. Conventional resharpening techniques can be used when the knife blade edges eventually become dull before reapplying the Rocklinizing process.