(NEW!) CPM MagnaCut *Surface Ground Bar Stock HRA .075" - See Length Note

CPM-MagnaCut Bar Stock

LENGTH NOTE:

We buy this in 36" lengths and sell it in 12", 24", and 36" lengths.

If you buy 1, you will get a stick 12" long by the width and thickness shown.

If you buy 2, you will get a bar that is 24" in length.

If you buy 3, you will get a bar that is 36" in length.

**If you buy 2 or 3 and want it cut into 12" length pieces, please specify in the comments section that you would like them cut into 12" pieces.

**Advertised price is for 1qty 12" piece

• Sheared
• Surface Ground
  
• Ground to specified thickness with tolerance of plus .010"
  

Composition of CPM MagnaCut Steel

   Carbon  1.15%

   Chromium  10.7%

   Vanadium  4.00%

   Molybdenum  2.00%

   Niobium  2.0%

   Nitrogen  0.2%

CPM MagnaCut is a new alloy developed by Dr Larrin Thomas the premeire metallurgist in the Knife steel industry.  he teamed up Niagara Speciality Metals to create this new exciting alloy



Link below has comprehensive heat treat information and much more 

 https://knifesteelnerds.com/2021/03/25/cpm-magnacut/

Heat Treatment for CPM MagnaCut

Wrap blade in stainless steel heat treat foil

Bring it up to Austenitizing temp 2050F and hold for 15 - 30 minutes

Quench in air or plate quench.

A Cryo treatment in liquid nitrogen (or dry ice) before tempering will increase hardness

Temper between 350F twice at 2 hours each time. Cool to room temperature in between tempers.