KMG Grinder - Variable Speed

In stock
Only 10 left
Shelf Location
Write Your Own Review
You're reviewing:KMG Grinder - Variable Speed
Your Rating

KMG Grinder - Variable Speed

This is the flagship model of the KMG Grinders!

Package includes:

  • Optional 10″ or 8" contact wheel included. (Can run upto 14" wheel)
  • Platen Attachment.
  • Work rest.
  • Adjustable toolbar
  • CNC machined
  • 2 hp variable speed motor and VFD, or optional 3 hp motor.
  • Pulley for motor.
  • Pulley for grinder.
  • Drive belt.
  • Base plate.
  • Mounting bracket for VFD and electrical hardware.
  • Uses 2 X 72″ belts.
  • Made in the USA
  • Not recommended to run in reverse

Typically, the KMG Grinders ship in up to three separate boxes. The Chassis is all steel. unpainted and unplated, with precisely bolted joints and minimum welding. The KMG was intentionally designed so that the motor was not an integral part of the machine which allows for unlimited choices in how the grinder is powered. This allows you to use just about any type of motor and it also allows to set the grinder up with different speeds by changing the pulley ratio between the motor and grinder. Typical motor sizes for the KMG can be from 1-1/2 to 5 hp. We prefer to drive the KMG with pulleys and a belt to maximize the versatility, however, you can also direct drive with a motor coupling of your choice. With the standard 4″ drive wheel, the abrasive belt speed is easily calculated as follows:

Belt speed (ft/min) = RPM  (example:  100rpm= 100ft/min,  3500 rpm= 3500ft/min)