Gear Pivot Head, .312" Head Dia, 6-64 Thread, .15" Thread Length, Copper

In stock
SKU
PP-391-PS312GRH1X64C
Shelf Location
I1.5
$3.52
Bulk Discounts
  • Buy 2 for $3.34 each and save 5%
  • Buy 5 for $3.17 each and save 10%
  • Buy 10 for $2.99 each and save 15%
  • Buy 15 for $2.82 each and save 20%
  • Buy 25 for $2.64 each and save 25%
  • Buy 50 for $2.46 each and save 30%
Write Your Own Review
You're reviewing:Gear Pivot Head, .312" Head Dia, 6-64 Thread, .15" Thread Length, Copper
Your Rating

Gear Pivot Head

 

Gear Pivot Head

TORX T-15 drive

.312" Diameter head

.09" Head Thickness

6-64 Fine Pitch Thread

.15" Thread Length under the head

Made of Copper

 

Made in the USA all the way!

 

The 64tpi on these allows a much finer adjustment when dialing in your knife build.

 

This is a part of a three part pivot system. You use two heads and pivot barrel. We would also suggest adding a bushing to the barrel to fit blade/washer stackup perfectly. Some makers prefer a fancy pivot head on one side and a traditional screw head on the back side. We will also have button head screws in this fine pitch in #8 and #6 sizes in both stainless and titanium to fit one side of the knife.

 

These disc pivots were designed to go with our #6-64 thread Pivot Barrels. 

We have two lengths of pivot barrels available that fit this pivot head:

Pivot Barrel, Fine Pitch, Stainless Steel, 3/16"D x .280"L, 6-64 Thread

Pivot Barrel, Fine Pitch, Stainless Steel, 3/16"D x .375"L, 6-64 Thread

 

The disc head is .312" so you can use a standard cutter in .3125" (5/16") diameter to countersink these.

 

We can make custom pivots like these to your design or specifications in batches of 500 or more. Call for more information.

 

Note: Pictured are muliple Pivots.  You are purchasing one single Pivot. If you want the Pivot head on both sides of your knife, order 2.