G10 Liner - UltreX™ Neon Green .030 & .060 - Knife Handle Material

In stock
SKU
HMSL-G10-UL-NeonGrn
Shelf Location
C3.7
Grouped product items
Product Name Qty
G10 Liner Ultrex Neon Green .030"x1.5"x6" Scales
$2.04
Bulk Discounts
  • Buy 3 for $1.97 each and save 3%
G10 Liner Ultrex Neon Green .030"x6"x12" Sheet
$8.15
G10 Liner Ultrex Neon Green .030"x12"x12"
$13.97
G10 Liner Ultrex Neon Green .030"x12"x24"
$24.45
G10 Liner Ultrex Neon Green .060"x1.5"x6" Scales
$3.41
G10 Liner Ultrex Neon Green .060"x6"x12" Sheet
$13.64
G10 Liner Ultrex Neon Green .060"x12"x12"
$23.39
G10 Liner Ultrex Neon Green .060"x12"x24"
$40.39
Write Your Own Review
You're reviewing:G10 Liner - UltreX™ Neon Green .030 & .060 - Knife Handle Material
Your Rating

UltreX™ G10 Liner

- Neon Green

- come in .030 scales, sheets, 12x12's, and 12x24's

 

This g10 is .030"  thick and used as liner or spacer in your knife handles.

It is called a liner when used on a full tang knife and sandwiched between a scale and the tang.

It is called a spacer when stacked in line in a full tang knife.

When it is used in a folder between the scale and metal liner it gets confusing. Call it a g10 liner.

The advantage to this material is it doesn't absorb water and comes in a wider assortment than traditional vulcanized liner material.



TIP: This is g10 and needs to be really roughed up for glue to stick to it. Use a 36 or 40 grit abrasive and scratch every bit of you can for a good bond.