G10 Liner - Ultrex™ Dark Grey .030, & .060 - Knife Handle Material

In stock
SKU
HMSL-G10-UL-DarkGry
Shelf Location
D1.2 & D2.2
Grouped product items
Product Name Qty
G10 Liner - Ultrex™ Dark Grey .030"x1.5"x6" Scales
$2.04
Bulk Discounts
  • Buy 3 for $1.97 each and save 3%
G10 Liner - Ultrex™ Dark Grey .030" x 6" x 12" SHEET
$8.15
G10 Liner - Ultrex™ Dark Grey .030"x12"x12" Square
$13.97
G10 Liner - Ultrex™ Dark Grey .030"x12"x24" Rectangle
$24.45
G10 Liner - Ultrex™ Dark Grey .060"x1.5"x6" pair of scales
$3.41
Bulk Discounts
  • Buy 3 for $3.29 each and save 4%
G10 Liner - Ultrex™ Dark Grey .060" 6"x12"- SHEET
$13.64
G10 Liner - Ultrex™ Dark Grey .060"x12"x12" Square
$23.39
G10 Liner - Ultrex™ Dark Grey .060"x12"x24" Rectangle
$40.39
Write Your Own Review
You're reviewing:G10 Liner - Ultrex™ Dark Grey .030, & .060 - Knife Handle Material
Your Rating

G10 Liner

- Dark Grey

- come in .030 and .060 scales and sheets


This g10 is .030" or .060" thick and used as liner or spacer in your knife handles.

It is called a liner when used on a full tang knife and sandwiched between a scale and the tang.

It is called a spacer when stacked in line in a full tang knife.

When it is used in a folder between the scale and metal liner it gets confusing. Call it a g10 liner.

The advantage to this material is it doesn't absorb water and comes in a wider assortment than traditional vulcanized liner material.


TIP: This is g10 and needs to be really roughed up for glue to stick to it. Use a 36 or 40 grit abrasive and scratch every bit of you can for a good bond.