G10 - Black 3/4"x3"x12" Piece

Black G10

• Piece is 3/4" x 3" x 12"
• This is G10, an epoxy and glass mat based laminate. It is exceptionally durable and tough material. It will probably out last a knife handle. It finishes to a very nice polish with visible pattern and it is translucent. This material has layered canvas weave glass matting. Wear a respirator when grinding or sanding as any glass fibers raised during sanding or grinding will be hard on lungs.
• Tip: I use a wet tile saw with diamond blade when cutting G10 or Phenolic. This material can be cut with a metal band saw or even wood cutting band saw but go slow or you will burn it. Expect it to dull your band saw blade so use an old one. Some makers have had good luck cutting this material with a table saw and carbide blade.