Caged Bearings - Pair - for 5/32 Pivot - .047" Th x .165" ID x .307" OD
In stock
SKU
FKP-KDM-CB-.047-.165-.307
Shelf Location
I1.8
$5.13
Bulk Discounts
- Buy 5 for $4.62 each and save 10%
- Buy 10 for $4.10 each and save 20%
- Buy 50 for $3.59 each and save 30%
Write Your Own Review
1/8"+ ID Ball Bearings:
Brass Cage with 8 ball bearings
- .165" or 4.2mm ID
- .307" or 7.8mm OD
- .0473" or 1.2mm thick
- Ball type SS
- .165" or 4.2mm ID
- .307" or 7.8mm OD
- .0118" or .3mm thick
Sold as a set. Each set includes 2 bearings and 2 SS Washers.
Use these in small gent size folders or balisong knives. We have one size slightly smaller than this one. Use this bearing set where you want just a bit more size to it.
These will fit a typical 1/8" barrel pivot.
NOTE: When milling a pocket for these in the handle or blade or both, the main concern is the outer diameter. The ID does not have to snug up against the pivot. The pocket will hold the bearing in place perfectly.
You don't have to use the washers to work with these bearings.
