BeaverDust- Gunmetal Grey Mica Powder- 45 grams
In stock
Only 7 left
SKU
HMEG-Dust-GunmetalGrey
Shelf Location
Location?
$14.00
Write Your Own Review
BeaverDust- Gunmetal Grey- Mica Powder
- 45 gram jar
- This mica pigment powder is ideal for epoxy, resin, woodworking, plastics, slime, cosmetics, fishing lures, bath bombs, jewelry, lip balm, acrylic, candle making and much more.
- Our Mica Pigments are 10-60 microns in size which is perfect for working with resins, lacquer, epoxy, cosmetics, automotive paint, nail polish, latex and many other applications.
Application information:
Suggested : 1/8 teaspoon per 1 liter will give you a medium transparency effect.
When it comes to mixing pigments together there are NO Rules! Just like mixing paint to achieve different colours, you can experiment with any combination to create whatever effect you are looking for.
Transparent Effect:
To achieve this look of only a slight colour tint and still being able to see through your pour,you will want to make sure you only add in a small ratio of pigment to resin.Remember you can always add pigment but you can not remove it from your epoxy! Deciding on transparency level is subjective and up to personal preference.A safe way to start out is with 1/16 teaspoon of pigment to see how it effects the amount you are pouring and continue to add from there.
Opaque Effect:
This application you will not be able to see through your pour. Remember when you are mixing in a container that the resin is more concentrated. Make sure you have added enough to reach your desired look before pouring it out into your project.If you begin to pour and you are not satisfied with what the colour looks like, immediately stop. Mix more pigment into your container throughly before you continue to pour out the rest of your resin.Testing Opacity:
To get an idea of what the transparency level is, take a popsicle stick (or your stir device) and stick it into the container the depth of what you are pouring (IE if you are pouring 1.5" thick, put your popsicle stick 1.5" deep into your container). If you can see it, that means your pour will still be translucent and you will be able to see through the pour. Add more pigment until you can not see the end of the stir stick if you are looking for an opaque look.Make sure you throughly mix your resin before adding pigment. It's easiest to evaluate the true colour of the pigment when mixed in a clear container.
Mixing Pigment with Resin:
To measure the amount of pigment, we simply use measuring spoons.When mixing the pigment with your resin, you can use a mixer drill attachment. You can also mix by hand using a wooden paint or popcycle sticks for smaller quantities.
A little bit of pigment goes a long way. We suggest to add a small amount to your pour and add a little bit at a time while thoroughly mixing in-between until you achieve the desired look. Make sure you are mixing throughly scraping the sides, bottom of your container and stir stick. You don't want the pigment to settle on the sides or bottom of your container leaving large amount of flecks not stirred into the resin.
