8670 Bar Stock Steel .250" Thickness - See Length Note

In stock
SKU
MESF-8670-.250
Shelf Location
PR10.2
Grouped product items
Product Name Qty
8670 Bar Stock Steel .250" Thickness x 1.5" - See Length Note
$7.22
8670 Bar Stock Steel .250" Thickness x 4"x 11.5"- END CUT
$12.72
8670 Bar Stock Steel .250" Thickness x 4" - See Length Note
$13.27

8670 is an extremely tough Carbon steel commonly used for large bandsaw blades found in the lumber industry. The nickel content along with the carbon content creates a very durable steel that also can hold a strong edge. It will be a great steel for big choppers and hard use blades

LENGTH NOTE:

We buy this in 36" lengths and sell it in 12", 24", and 36" lengths.

If you buy 1ea, you will get a stick 12" long by the width and thickness shown.

If you buy 2, you will get a bar that is 24" in length.

If you buy 3, you will get a bar that is 36" in length.

**If you buy 2 or 3 and want it cut into 12" length pieces, please specify in the comments section that you would like them cut into 12" pieces.

**Advertised price is for 1qty 12" piece

This steel is Hot Rolled (HR) and comes fully annealed

Chemical makeup of our 8670 alloy:

C = .64/.75

Ni = .70/1.00

Cr = .30/.50

Mo = .05/.10

Mn = .40/.60

Si = .20/.35

S =0.025 max

P = 0.025 max

Heat Treatment for 8670 Carbon Steel

Place blade in forge or Heat treat oven pre-heated to Austenitizing temp 1500°F (soak for 5 - 10 minutes if using a heat treat oven)

Quench in fast oil like Park's 50

Temper between 350° to 400°F twice for 2 hours each time. Cool to room temperature in between tempers.

This Should give a hardness of 60-62 HRC

Write Your Own Review
You're reviewing:8670 Bar Stock Steel .250" Thickness - See Length Note
Your Rating