80CRV2 Bar Stock Steel .156" Thickness - See Length Note 3 Foot Maximum Length Per Bar

In stock
SKU
MESF-80CRV2-.156
Shelf Location
PR11.1
Grouped product items
Product Name Qty
80CRV2 Bar Stock Steel - .156" x 1.5" Sold By The Foot
$8.95
80CRV2 Bar Stock Steel - .156" x 1.5"- 5 pack, 6.5" pieces
$22.00
80CRV2 Bar Stock Steel - .156" x 2" Sold By The Foot
$10.95
Out of stock
80CRV2 Bar Stock Steel - .156" x 2"- 5 pack, 6.5" pieces
$26.00
Out of stock

80CRV2

 

LENGTH NOTE:

 

 We buy this in 36" lengths and sell it in 12", 24", 36" lengths.

 

 If you buy 1ea, you will get a stick 12" long by the width and thickness shown.

 

 If you buy 2, you will get a bar that is 24" in length.

 

 If you buy 3, you will get a bar that is 36" in length.

 

 

 **If you buy 2 or 3and want it cut into 12" length pieces, please specify in the comments section that you would like them cut into 12" pieces.

 

 **Advertised price is for 1qty 12" piece

 

 

Information about 80CRV2 steel

    - High carbon steel

    - Heat treating 80CRV2 is similar to 5160 steel

    - Good steel to use for forging and grinding

 

Typical Chemistry: Carbon 0.807 Silicon 0.32 Manganese 0.54 Phosphorus 0.010 Sulfur 0.003 Chromium 0.503 Vanadium 0.153

 


 

CRA (Cold Rolled Annealed) steel has a bright smooth finish and is easy to machine, drill and grind.

  

CRA means cold rolled annealed and is important to be in the description. It means the steel was pressure rolled while cold but was annealed again to relief the stress and take it to the softest state from rolling under tremendous pressure.

 

 HR means hot rolled and this steel was rolled to thickness usually during the smelting process but maybe later. The steel generally will be half or nearly fully hard depending on the type. It may often have mill scale residue. This steel can be easily forged. It can also be ground via stock removal. Drilling a hole in the tang maybe hard to do with out a carbide bit.

  

HRA is the same but the steel was later annealed to relieve stress and make it as soft as possible for easier machining. Several companies produce "powder" smelted steels. This is a premium smelting process that improves the mixing of alloy content and generally produces a finer grain structure as a result. The powder steels are nearly always annealed and can be assumed to annealed unless noted otherwise.
Write Your Own Review
You're reviewing:80CRV2 Bar Stock Steel .156" Thickness - See Length Note 3 Foot Maximum Length Per Bar
Your Rating
We found other products you might like!