Pivot Lap Interchangable Bushing - KnifeDogs - .093" Rod

In stock
SKU
PP-407-PLSB0938
Shelf Location
I1.2
$16.29

Pivot Lap Interchangable Bushing

  • Quality KnifeDogs Brand
  • O1 steel Hardened to 61/62RC
  • .093" Bushing with Plunger 



Use these pivot laps to sand down your pivot's or stand offs perfectly square and with perfect control.

How to use these - Method 1:
1. Select your bushing and put it into the base ("puck"). Tighten the set screw to pull the bushing bottom flush to the bottom of the puck. These are machined slightly off set so the bushing always pulls flush to the bottom of the puck.
2. Using a flat surface (granite - flat steel, glass - something flat), lay out a piece of sand paper. Start with a 120 grit.
3. Insert your pivot (or stand off) into the bushing and pushed plunger down on top of it. The pivot will want to fall out of the bottom hole.
4. Lay the whole thing on your sand paper and move it back and forth a few times while you are pushing down on the plunger. Each stroke takes a bit off your pivot.
5. Remove the pivot and measure. Repeat until you get the length you need.  It just took longer to read than it will take to do.

Method 2: Repeatable to a certain size:
1. Select your bushing and put it into the base ("puck"). Tighten the set screw to pull the bushing bottom flush to the bottom of the puck. These are machined slightly off set so the bushing always pulls flush to the bottom of the puck.
2. Using a flat surface (granite - flat steel, glass - something flat), lay out a piece of sand paper. Start with a 120 grit.
3. Stack spacer bushings (not included- Use tubing or a larger stand off sized to the exact length you need.) onto the plunger. Then insert your pivot (or stand off) into the bushing and pushed plunger down on top of it. The pivot will want to fall out of the bottom hole.
4. Lay the whole thing on your sand paper and move it back and forth a few times while you are pushing down on the plunger. Each stroke takes a bit off your pivot.
5. Remove the pivot and measure. Repeat until you get the length you need.  It just took longer to read than it will take to do.


Write Your Own Review
You're reviewing:Pivot Lap Interchangable Bushing - KnifeDogs - .093" Rod
Your Rating
We found other products you might like!