Jiffy Belt Sander Conversion for 4" x 36" Sanders

Out of stock
Shelf Location
100% of 100
Jiffy Belt Sander Conversion for 4" x 36" Sanders

Jiffy Belt Sander Conversion for 4" x 36" Sanders

Finally! A product that will let you turn that old, slow 4x36 belt sander into an easy to use, cheap to feed belt sander of the future.

Utilizing either 1x42 or 2x48 belts with a multi-use sanding platform, your old sander can now use a whole new world of sanding belts, grits, and flexible backings. Best of all, these belts can last over 50% longer, and can cost less than $1 each!

Here is what you will get:

  • Conversion Attachment
  • Clamping Plate with bolts
  • 1 - 2x48 belt
  • 2 1/2" wheel and 3.8" wheel
  • Flat Platen


What makes the Jiffy so special? Well, aside from the whole amazing multi-purpose sander of the future thing?

Built by a craftsman for a craftsman.

Handmade in the USA.


There are also lots of quality features packed into the Jiffy itself.

  • Abec3+ bearings spin forever.And ever. And ever....
  • All threads into aluminum are Heli-coiled for long life.
  • Lathe turned axles help keep wheels true and tracking smooth.
  • 78A Durometer wheels allow smooth grinding on the wheel itself.




  • What is the Big Wheel for?
  • The Big Wheel is a 3.8" contact wheel that allows for working directly on the wheel. While both wheels are a medium density polyurethane, the larger wheel gives a bit flatter surface to work on, and more options for sanding inside larger curves. 
  • What is required for mounting?
  • You will need a drill and 1/4" drill bit, about 1' of electrical tape or similar, and a way to tighten (2) 7/16 head nuts/bolts. In use, you may occasionally have use for an Allen wrench to tighten the nuts for the tilting feature.

Write Your Own Review
You're reviewing:Jiffy Belt Sander Conversion for 4" x 36" Sanders
Your Rating