G10 Liner - UltreX™ Hunter Orange .030 & .060 - Knife Handle Material

Out of stock
SKU
HMSL-G10-UL-HunOr-
Shelf Location
D2.7
Grouped product items
Product Name
G10 Liner - UltreX™ Hunter Orange .030" x 1.5" x 6" Pair of Scales
$1.60
Bulk Discounts
  • Buy 2 for $1.52 each and save 5%
  • Buy 3 for $1.44 each and save 10%
G10 Liner - UltreX™ Hunter Orange .030" x 6" x 12" Sheet
$5.77
G10 Liner - UltreX™ Hunter Orange .030" x 12" x 12" Square
$9.90
G10 Liner - UltreX™ Hunter Orange .030" x 12" x 24" Rectangle
$17.32
G10 Liner - UltreX™ Hunter Orange .060" x 1.5" x 6" Pair of Scales
$2.74
Bulk Discounts
  • Buy 2 for $2.60 each and save 5%
  • Buy 3 for $2.47 each and save 10%
G10 Liner - UltreX™ Hunter Orange .060" x 6" x 12" Sheet
$9.86
G10 Liner - UltreX™ Hunter Orange .060" x 12" x 12" Square
$16.90
G10 Liner - UltreX™ Hunter Orange .060" x 12" x 24" Rectangle
$29.57

UltreX™ G10 Liner

- Hunter Orange

- come in .030 and .060 scales, sheets, 12x12's, and 12x24's


This g10 is .030" or .060" thick and used as liner or spacer in your knife handles.

It is called a liner when used on a full tang knife and sandwiched between a scale and the tang.

It is called a spacer when stacked in line in a full tang knife.

When it is used in a folder between the scale and metal liner it gets confusing. Call it a g10 liner.

The advantage to this material is it doesn't absorb water and comes in a wider assortment than traditional vulcanized liner material.



TIP: This is g10 and needs to be really roughed up for glue to stick to it. Use a 36 or 40 grit abrasive and scratch every bit of you can for a good bond.

Write Your Own Review
You're reviewing:G10 Liner - UltreX™ Hunter Orange .030 & .060 - Knife Handle Material
Your Rating
We found other products you might like!