Evenheat Cube 7 Heat Treat Oven - 120V

In stock
Only %1 left
Evenheat Cube7
Shelf Location
As low as $1,932.00

  These are shipped directly from Evenheat.

 It is important to setup a customs broker
 for international orders prior to shipping.

More Info

Evenheat Cube 7 Heat Treat Oven


Evenheat Kiln Free Shipping Terms

Evenheat Kiln free shipping includes shipping cost, residential fees, and potential lift gate service fees within the contiguous United States. Free shipping will be based on Standard UPS and Motor Freight. Any form of expedited shipping will be paid by the customer. Shipping for replacement parts or upgraded parts after purchase will be paid for by the customer.

To be clear contiguous United States excludes shipping to Alaska and Hawaii. Orders being sent outside the contiguous United States our Internationally the customer will be subject to all shipping cost.


Outside the lower 48 When checking out, the shipping charges in the shopping cart will not be accurate!

To find out the shipping you can contact us via email. Please send us your full shipping address, the oven you would like to purchase, and the best way to contact you. We will get the shipping quote from Evenheat and get back to you. Or you can call us at 507-720-6063 and we will get a quote for you.


Cube 7:
The Cube 7 is designed for heat treaters whose shops and workbenches come with a mortgage. Simply plug the Cube 7 into any standard 120V household receptacle and you're ready to go.

The Cube Series takes its design from our well regarded KF Series. It's a rugged and solid design that serves the heat treater well.

Available with the Set-Pro, Rampmaster, or TAP Touchscreen Controller.


  • 7” W x 7” H x 7” D
  • 70 lbs shipping weight
  • 120 volts, 13 amps, 1560 watts, NEMA 5-15P (Standard Household Plug)
  • Max temp on the Cube 7 ovens is 2350F


  • Access Port (Pat. Pending)
  • Cool-touch handle
  • Corner mounting technique
  • Excellent temperature distribution
  • Full stainless jacket
  • Loud Alarm Output Jack (Rampmaster, & TAP)
  • Multiple Control Options (Set-Pro, Rampmaster, & TAP)
  • Power Inturrupt Switch
  • Responsive thermocouples
  • Side-opening Door
  • Standard Household Plug
  • Swing View Adjustable Control

Controllers:(click below for more information)

Options: (click below for more information)

Accessories: (click below for more information)

Write Your Own Review
You're reviewing:Evenheat Cube 7 Heat Treat Oven - 120V
Your Rating


The Rampmaster has always been a preferred control for many heat treaters. The Rampmaster differs from our standard Set-Pro control in that it allows for up to 12 programs and uses a numerical keypad for data entry.

The Rampmaster for heat treating uses the Custom Mode for all programming and contains a variety of On-the-Fly adjustments and special menu functions designed for fine-tuning.

New for 2010 is our updated Alarm package that alerts you when the soak/hold period is reached and when the soak/hold period has ended. You'll never miss an opportunity to be at the oven when you need to be!

Rampmaster Controller

Custom Mode Programming

Develop your own heat treating programs using the Custom Mode. Custom Mode allows you to determine your specific temperature rates, set points and hold times. Custom Mode Programming offers 12 individual programs. Each of the 12 programs allows for up to 32 segments. All On-the-Fly features such as adding time and temperature to holds and skipping ahead are available.

12 Custom Mode Programs

The Rampmaster allows the heat treater to save up to 12 Custom Mode programs in memory. Your programs remain in these 12 locations indefinitely and can be recalled for use or modification at any time.

Numerical Keypad for Data Entry

One reason the Rampmaster is preferred over the Set-Pro for heat treating is its numerical keypad. Simply key in your data.

Upgraded Alarm Features - New for 2010

We have updated our Alarm features in 2010 to include two new alarms that help you to be at the oven when you need to be.

Beginning of Process Alarm - The Beginning of Process alarm alerts you when the oven temperature has reached the process temperature soak/hold period. The process temperature soak/hold is where your heat treating takes place. For those who like to load the oven at this point, this alarm was made just for you.

End of Process Alarm - The End of Process alarm alerts you when the process temperature soak/hold period has ended and it's time to remove the material for quenching or further processing. This is a very critical point and this alarm lets you know when to act.

General Temperature Alarm - The Rampmaster also features a general temperature alarm. This alarm feature allows you to determine the temperature when the alarm sounds.

View Segment Feature

While running, the Rampmaster displays the basic information of current temperature and time. It does not display your program settings. Doing so would be overwhelming and confusing, and that's not good. However, there are times during a program when this information must be known and View feature does just that. A simple press of a key is all it takes to see what the Rampmaster is up to.

Back Key

The BACK key has a very simple function: it takes you back to what you were viewing previously. It's helpful during programming to check previously entered data and it comes in handy when going through various Menu options. Just press it to go back!

32 Segments per Program: The Rampmaster allows you to use up to 32 segments for each Custom Mode program.

Add Time to Hold While Running

It's possible to add additional temperature to a programmed hold temperature. The ADD TEMP feature increases the hold temperature by 5° (factory default) with every press of the ADD TEMP key. Like the Add Time feature, the Add Temp feature uses a dedicated, single function key to make use easy and anxiety-free.

Suspend the Program

The Suspend feature works much like the Add Time feature, but with a twist: you may suspend the program (cause the temperature to hold) at any point in the program, not just at the programmed hold point. The suspend feature temporarily interrupts the program and holds at the currently displayed temperature. Once the suspend is canceled, or times out, the program begins where it left off. It essentially lets you "buy some time" at any point in the heat treating process.

More Features

The Rampmaster 3 has many more features including a delayed start, PC compatibility, error diagnostics, and many related menus and viewing options.


The TAP Controller features a touchscreen design that offers a large screen with full text. All commands and menu items are legible, easy to read and easy to operate. Simply respond to the screen with a touch! The TAP Controller is supplied pre-loaded with firing schedules as well as allowing the artist to create and store their own custom programs. On-the-fly features such as adding time to hold, adding temperature to hold and skipping ahead are available and easy to use.

The TAP Controller allows for Wi-Fi connection via our well-placed USB and Ethernet ports. This connectivity allows the artist to monitor the kiln, develop and edit programs and perform TAP Controller functions from a networked computer, tablet or mobile device. WiFi Dongle Add-On

Touchscreen technology offers many improvements and Evenheat is dedicated to providing this technology to our customers.

TAP Controller

All Information Displayed on One Screen: Because the TAP Controller offers a fairly large display screen it is possible to display all firing information on one screen, in full text, while firing. There's no need to touch the screen and go looking. The display will show your current firing segment or step, current kiln chamber temperature, the current programmed rate per hour and hold time. It's all there at one time and on one screen. We love this feature as it tells us exactly where we are in the firing without having to touch the control.

The Display from a Distance: While programming and using the TAP Controller, screen information is presented in a legible and easy to understand text and font size. While sitting at the Standby position or when running a firing schedule the TAP Controller screen changes to a large font, high contrast display which is easily seen from across the studio or workspace. Near or far, the TAP display has you covered.

Running a Pre-loaded or Stored Firing Schedule: The TAP Controller is supplied with pre-loaded firing schedules that differ depending upon the style of kiln. Currently, we offer pre-loaded glass, ceramic and metal clay firing schedules (programs). All of our pre-loaded firing schedules have been developed professionally on Evenheat equipment.

Custom Mode Programming:  Feel free to develop your own, custom programs. The TAP Controller makes it very easy and understandable. All firing data is shown on the touchscreen as you develop which makes it very easy to keep your place and not get lost in the process. Your firing data will be shown in a table format and is entirely legible and understandable. This full-text feature of the TAP Controller is one of its highlights. All information is available to the eye.

The TAP Controller contains a vast amount of memory and there is no practical limit to the number of programs you wish to create and store. There is also no practical limit on the number of available segments or steps used for a firing schedule. You're free to create exactly what you want.

Modifying Firing Schedules: Firing schedules (programs), whether pre-loaded or custom, are sometimes not exactly to your liking or needs. The TAP Controller allows you to modify or edit any stored program more to your liking. Simply choose to edit the firing schedule and make the changes.

Wi-Fi Capability: The TAP Controller is designed for computer networking via USB Wi-Fi or Ethernet connections. This connectivity allows the artist to monitor the kiln, develop and edit programs and perform TAP Controller functions from a network connected computer, tablet or other mobile devices. WiFi Dongle Add-On

Add Time to Hold While Firing: During firing, it's not uncommon that additional hold time may be needed to achieve the desired results. The TAP responds to this desire by allowing you to add any amount of time to the Hold while in progress.

Add Temperature to a Hold While Firing: During firing, it's not uncommon to add to the set point temperature to achieve the desired results. The TAP responds to this desire by allowing you to change the set point temperature while the Hold is in progress.

Skipping Ahead to the Next Segment: You'll find moments while firing when you would like to stop the process and skip ahead to the next available segment or step (very common in glass firing). The TAP Controller offers a single touch feature that allows just for this. It's called Skip Ahead. The Skip Ahead feature does what it sounds like: it skips ahead to the next segment. With glass firing, the segment or step right after the fusing or slumping operation is the anneal, which is exactly where you want to go. It's a great feature that allows you to make the glass you want to make.

Accessible USB and Ethernet Ports: Evenheat has designed our TAP Controller package for instant, direct access to the USB and Ethernet ports. There's no need to disassemble the kiln to access these ports. These ports are readily accessible from the outside of the Controller package, simply plug in and go. Proper design and execution, it's what you expect and get from Evenheat.

Cost per Firing: The TAP Controller monitors many functions, among them is your actual cost per firing. Simply enter your cost per kilowatt hour and the wattage of your kiln. The TAP Controller uses this information to calculate a realistic approximation of the cost of your electrical usage for your firing schedules.

Graphing: During firing the TAP Controller collects the kiln chamber temperature and creates a visual graph that can be seen with a single touch of the screen. The graph is continually updated every minute for the duration of the firing. This allows the artist to monitor the history of the firing as it takes place. The visual graph is also stored in memory, along with the particular firing data and can be recalled and inspected at any time.

Software Updates: Software updates will be available on a semi-annual or as-needed basis and are downloaded to the TAP Controller via a USB thumb drive, Wi-Fi connection or Ethernet connection. Updating is fast and simple and will give you the latest in features, themes, and functionality.

Diagnostics: Diagnostics provide a real-time look into the usage of critical kiln components. From the diagnostics screen, you can view the actual number of relay actuations, the amount of time the heating elements have been on, and the amount of time the thermocouples have been exposed to high temperatures.

Logs: The TAP Controller stores all functions and user keystrokes into various logs. These logs become valuable for viewing previous firing graphs, error events, and programming functions.

Options & Accessories

Loud Alarm Option

Cut through your shop noise with our Loud Alarm Option. The Loud Alarm sounds at a loud 80+ decibels! You'll never miss the opportunity to properly quench again.

The load alarm option alerts the user when the heat treat process temperature and hold have been reached, and more importantly when it's over and it's time to quench. Rampmaster, Genesis & TAP equipped Evenheat KF, KO, KH as well as HT-1 and HT-2 heat treat oven models include a built-in alarm jack for easy install: simply attach the alarm and plug it in.

This Loud Alarm Option is intended for use on production models as of mid-April 2014 (serial numbers 107120 and greater). For those who own an oven made prior to this date (serial numbers 107119 and lower) we offer a Loud Alarm Retro- Fit Kit that allows you to enjoy this great feature.

Loud Alarm Add-On

Power Interrupt Switch

Automatic power interrupt removes power from all heating elements as the lid is opened and reapplies power as the lid is closed.

The switch used for this feature is a true safety switch and is designed specifically for safety applications. Those wishing to enter the kiln during firing should strongly consider requesting this option as an added measure of safety.

Power Interupt Switch Add-On

Quiet Drive Solid State

Solid state relays are special switches used to turn the heating elements on and off. Solid state relays enhance control performance, extend the life of the heating elements and are expected to last the life of the kiln.

Our Quiet Drive Solid State relays can turn the heating elements on and off up to 60 times per second as opposed to traditional mechanical relays that tend to be limited to about once every 10 seconds. This fast response time translates into tighter and more precise temperature regulation.

Evenheat uses special solid state relays that will only switch the heating elements on and off when the AC voltage is at 0V. It's called "Zero Crossing" and our heating elements love it and they show that love by lasting longer!

Solid state, by its nature, has no moving parts (that's why it's called solid state). No moving parts mean nothing to wear out and nothing to replace. Unlike traditional mechanical relays, our solid state relays are expected to last the life of your kiln.

Quiet Drive Soild State Relay Add-On

Wifi Add-On - TAP Controller Only

Wi-Fi is now included to establish a Wi-Fi Internet connection for the TAP control.

WiFi Dongle Setup Instructions

The TAP control in this oven now has Wi-Fi built in for Internet access. This connectivity allows the artist to monitor the kiln, develop and edit programs and perform TAP Controller functions from a networked computer, tablet or mobile device.

Knife Dogs Blade Fixture - 4.5" W x 5.9" D

Our Knife Dogs Blade fixture was designed to fit all the heat treat ovens we sell. They're designed to provide ample space for foil inflation while being absolutely rock solid and stable. You won't have to work around these and they certainly won't fall over. The KD fixture can hold up to 3 Blades for heat treating.

Knife Dogs Blade Fixture

Evenheat MK 1 Blade Fixture - 5 1/4" x 5 1/4"

Our MK1 Blade fixture was designed for our KH line of knife ovens, but they can also be used in the KF Line. They're well designed and provide ample space for foil inflation while being absolutely rock solid and stable. You won't have to work around these and they certainly won't fall over. The MK 1 can hold upto 4 Blades for heat treating.

Evenheat MK 1 Blade Fixture