Pivot Head "Petals" .310"D, 6-64 Thread, .15" Thread Length

In stock
SKU
PP-374-PS312FH1X64
Shelf Location
I1.6
$2.84
Bulk Discounts
  • Buy 2 for $2.70 each and save 5%
  • Buy 5 for $2.56 each and save 10%
  • Buy 10 for $2.41 each and save 15%
  • Buy 15 for $2.27 each and save 20%
  • Buy 25 for $2.13 each and save 25%
  • Buy 50 for $1.99 each and save 30%
Pivot head for folding knife Petals

Disc Pivot Head

Disc Head

TORX T-15 drive

.310"Diameter head

.100" Head Thickness

6-64 Fine Pitch Thread

.15" Thread Length under the head

Made of SS


Made in the USA all the way!

The 64tpi on these allows a much finer adjustment when dialing in your knife build.

This is a three part pivot system. You use two heads and pivot barrel. Some makers prefer a fancy pivot head on one side and a traditional screw head on the back side. We also have button head screws in this fine pitch in #8 and #6 sizes in both stainless and titanium to fit one side of the knife.

These disc pivots were designed to go with our #6-64 thread Pivot Barrels. 

We have two lengths of pivot barrels available that fit this pivot head:

Pivot Barrel, Fine Pitch, Stainless Steel, 3/16"D x .280"L, 6-64 Thread

Pivot Barrel, Fine Pitch, Stainless Steel, 3/16"D x .375"L, 6-64 Thread


These are satin finish. Give it a quick buff if you want more shine.


We can make custom pivots like these to your design or specifications in batches of 500 or more. Call for more information.

Note: Pictured are muliple Pivots and one Fine Pitch Pivot Barrel.  You are purchasing one single Pivot head at a time. If you want the Pivot head on both sides of your knife, order 2. Pivot barrels are sold seperately.



Write Your Own Review
You're reviewing:Pivot Head "Petals" .310"D, 6-64 Thread, .15" Thread Length
Your Rating
We found other products you might like!