Dexter Russell - GreenRiver Dadley Blade Blank High Carbon - Slight Rust

Out of stock
SKU
BBKB-DX-81120-Rust
Shelf Location
H1.2
$8.00
Dexter Russell - GreenRiver Dadley Blade Blank High Carbon - Slight Rust
Dexter Russell - GreenRiver Dadley Blade Blank High Carbon - Slight Rust Dexter Russell - GreenRiver Dadley Blade Blank High Carbon - Slight Rust

Dexter Russell - Green River

*Note: These blade blanks have some rust on them. As you can see in the picture the rust can be cleaned off using a scotchbrite belt or pad.

Specs:

- 10.5" long

- Tang pin holes are 5/32"

- Blade is .10" thick

- Tang is 1 1/8" wide

- C1095 High carbon steel

- GreenRiver Works

- Heat treated and ready to finish

 

If you need a big knife blade blank, this is the one. At 10 & 1/2 inches with a 5" cutting edge it should be all the knife you need! A great carving or large slicing knife.

 


 

**We now offer made in the USA sheath kits that you can purchase separately to pair with your favorite knife blanks. The recommended sheath(s) for this knife blank would be Sheath Kit #3, Sheath Kit #4, and Sheath Kit #14.

**For those of you who prefer not to make a sheath kit we also offer made in the USA completed sheaths. These completed sheaths are the same as the kits, except assembled for you by us. The sheath(s) for this knife would be Sheath Style #3, Sheath Style #4 and Sheath Style #14.

**And for even more convenience we offer fully completed made in the USA sheaths. These sheaths have been dyed brown by us so they are ready to go! The sheath(s) for this knife would be Brown Sheath Style #3, Brown Sheath Style #4 and Brown Sheath Style #14.

Write Your Own Review
You're reviewing:Dexter Russell - GreenRiver Dadley Blade Blank High Carbon - Slight Rust
Your Rating