Counterbore for #2 Fillister Head screw HS
Out of stock
SKU
DTSB-MD-CB-502-2-FillisterHead
Shelf Location
J5.9
$10.22
Write Your Own Review
Counterbore
Use these counter bores create a flat bottomed hole. These special drill bits have a pilot that fits into the already drilled hole. The flutes will widen the hole and create a flat bottom. This flat bottom allows you to have your fastener flush with the surface. These counter bores are designed fillister screws but they should work with your Socket Head screws. You should verify the diameter to make sure.
The data for these Counterbores
#size pilot dia cut dia
#2 .085" .155"
#4 .111" .198"
#8 .163" .285"
Sorry, we don't have these one piece counterbores for any smaller sizes.
The picture shows a counterbore and counter sunk 4-40 socket head screw.
- High Speed Steel
- For #2 Screw
- One piece construction
Use these counter bores create a flat bottomed hole. These special drill bits have a pilot that fits into the already drilled hole. The flutes will widen the hole and create a flat bottom. This flat bottom allows you to have your fastener flush with the surface. These counter bores are designed fillister screws but they should work with your Socket Head screws. You should verify the diameter to make sure.
The data for these Counterbores
#size pilot dia cut dia
#2 .085" .155"
#4 .111" .198"
#8 .163" .285"
Sorry, we don't have these one piece counterbores for any smaller sizes.
The picture shows a counterbore and counter sunk 4-40 socket head screw.