Elmax .098" Thick, 1" Wide, 3' foot long Bar Discounted - SURFACE DEFECTS

In stock
SKU
MESS-Elmax-.098x1-Dents
Shelf Location
PR 11.2
$34.60
Elmax .098" Thick, 1" Wide, 3' foot long Bar Discounted - SURFACE DEFECTS

Elmax .098" x 1" 3' Bar (Surface Dents Roughly .010" Deep)

**This steel has some scattered surface dents roughly .010" Deep.**

 

 

Uddeholm Elmax is a high chromium vanadium-
molybdenum-alloyed steel with the
following characteristics:

• High wear resistance
• High compressive strength
• Corrosion resistant
• Very good dimensional stability


High wear resistance is normally connected to
low corrosion resistance and vice versa. In
Uddeholm Elmax it has however been able to
achieve this unique combination of properties
by a powder-metallurgy-based production.

Typical             C     Si     Mn     Cr     Mo     V      
analysis %     1.7     0.8     0.3     18.0     1.0     3.0      
Delivery          
condition     Soft annealed approx. 280 Brinell      

Obtain the data sheet directly from Bohler Uddeholm
http://www.bucorp.com/files/UDDEHOLM_ELMAX.pdf

Write Your Own Review
You're reviewing:Elmax .098" Thick, 1" Wide, 3' foot long Bar Discounted - SURFACE DEFECTS
Your Rating