Cylinder Engraver 5/64", 1/8" Shaft - compare to Dremel 193
In stock
Only 1 left
SKU
EC-WS-d-al18-5-64-Straight
Shelf Location
K2.4
$4.68
Write Your Own Review
5/64" Round Cutting Burr
Use these for inlay carving - or just carving in general. Very small and delicate. Use these in combination with the shield template and jig plate. Mount it in your chuck so the shaft rides against the shield template at the depth you want your shield inlay to be.
TIP: If you are using these for the Shields we sell, these are too large to get in the corners. We have these so you can remove the biggest part of the material in a hurry and then you would switch to a much smaller burr for the details.
Note: Similar to picture.
- Compare to a Dremel 193 tool
Use these for inlay carving - or just carving in general. Very small and delicate. Use these in combination with the shield template and jig plate. Mount it in your chuck so the shaft rides against the shield template at the depth you want your shield inlay to be.
TIP: If you are using these for the Shields we sell, these are too large to get in the corners. We have these so you can remove the biggest part of the material in a hurry and then you would switch to a much smaller burr for the details.
Note: Similar to picture.
