Atlas Hellfire Swordsmith Forge

In stock
SKU
Atlas Swordsmith Forge
Shelf Location
DS
Special Price $265.00 Regular Price $350.00
Atlas Hellfire Swordsmith Forge
Atlas Hellfire Swordsmith Forge Atlas Hellfire Swordsmith Forge Atlas Hellfire Swordsmith Forge Atlas Hellfire Swordsmith Forge

Atlas Hellfire Swordsmith Forge

***These will be shipped direct from the manufacture***

“Introducing our new budget line of swordsmith forges.”

Simple and affordable, these are inswool lined forges.
Designed to have the front and rear partially blocked by firebricks
We include a bag of Satanite 3000° refractory to line the shell for longer life
We include a bag of Kastolite/Plibrico to build a flux resistant bottom 

Features:
5″ x 18″ open-ended chamber
Removable/adjustable legs for uneven surfaces (stumps, ground, etc.)
Dual 100k BTU burners
0-20 PSI regulator
Stainless reinforced tee
2 x Bags of Kastolite LI30 flux-resistant mortar
Bag of Satanite 3000° refractory mortar

 

Some assembly required.
1. Install the included leg bolts
2. Install the included 8-32NC bolts into the burner port
3. Mix the Kastolite/Plibrico powder with water, a little at a time, until paste-like. Use this mixture to build a bottom for the forge chamber.
4. Mix a splash of water with the Satanite and mix until wet, coat the entire inside of the forge. Rubber gloves work best.
5. Allow to Cure for a couple of days before lighting forge

Be aware that the bricks are very fragile and will crack due to expansion from heating, moisture, etc. This is normal and unavoidable. We have used thermal imaging to inspect the forges during use and have found that it does NOT affect the performance of the forge.

 

Do not operate until you have coated the wool with refractory

Write Your Own Review
You're reviewing:Atlas Hellfire Swordsmith Forge
Your Rating