3M Particle Filter #2071 for 7000 series respirator

In stock
SKU
SFTY-HS-3m-2071-ParticFilter
Shelf Location
Q3.5
$9.21
Write Your Own Review
You're reviewing:3M Particle Filter #2071 for 7000 series respirator
Your Rating

3M #2701 Particle Filter for Respirator

  • Fits 5000,6000 and 7000 series respirators
  • Bayonet mount fits dozens of others also
  • P95 filtration grade


These filters fit the 7000 series full face mask respirator we sell. These economical filters have a 95 filtration rating and are suitable for welding,grinding and sanding.

From the 3M site:
Use For:
• Solids such as those from processing minerals, coal,
iron ore, cotton, flour, and certain other substances.
• Liquid or oil based particles from sprays that do not also
emit harmful vapors.
• Metal fumes produced from welding, brazing, cutting and
other operations involving heating of metals.

Do Not Use For:
Gases and vapors including those present in paint spraying operations,
unless combined with approved chemical cartridges. Asbestos.
Sandblasting. This respirator filter does not supply oxygen.
Concentrations that exceed 10 times the OSHA PEL with a half
facepiece, or 50 times the PEL with a full facepiece when quantitatively
fit tested, or applicable government regulations, whichever is lower.