Metal Cutting Band Saw Blades
- 64 1/2" x 1/2" x .025"
- 14Reg tooth
These are high quality bandsaw blades by the same company as Foredom tools.
Some general blade information:
Metal Cutting Band Saw Blades64-1/2" long x 1/2" wide blades fit most 4"x 6" horizontal/vertical metal cutting band saws.
93" x 3/4" wide blades fit most 7" x 12" horizontal metal cutting band saws such as Delta, Jet and others.
Hard Edge Hard Back with Wavy Tooth Style
Tooth Hardness: 62-63Rc Back Hardness: 40-42 Rc
Hard Edge Hard Back permits greater tension, improved blade rigidity, straighter, more accurate cuts, and greater blade strength allowing higher feed pressure. Ideal for easy-to-machine metal and similar materials at slow speeds and interrupted cuts such as pipe, tube, channel stock, etc. These 1/2" wide blades offer economy & value for mild contour cuts on vertical machines and cutoff operations on common horizontal band saws.
Bi-Metal Matrix with Variable Pitch Teeth blades have a high speed matrix cutting edge, electron beam welded to a low alloy shock resistant back and resist heat in excess of 1000o F. They cut faster, last 10 times longer than carbon flex back or hard back, and have excellent shock and abrasion resistance.
Use Bi-Metal Matrix blades for horizontal gravity fed metal cutting band saws to cut a wide range of hard materials in production cut-off operations using heavy duty horizontal band saws.
Narrow widths are for vertical band saws to cut radii in hard-to-machine die steels, for contour cutting, re-sawing exotic woods, and for solids and for interrupted cutting.