Paragon KM18T Furnace W5.5"xD18"xH4.25" Sentry Digital 12key
IMPORTANT NOTES ON ORDERING:
These are shipped directly from Paragon. Lead time is 4-6 weeks.
When checking out, the shipping charges in the shopping cart are not accurate!
To find out the shipping you can contact us via email. Please send your shipping address, which oven and the best way to contact you. We will get the quote from Paragon and get back to you. Or you can call us at 507-720-6063 and we will get a quote for you.
If you would like you can go through the website to make the purchase and add a note as to the best way to reach you for the final shipping price. We will then contact Paragon to get the price and then let you know the price.
Paragon KM-18T Knife Makers Heat Treating Furnace
Great knives are more than steel and ornament. They contain a spirit that makes them feel as an extension of the hand. Touch a great knife, and it feels alive. As the knife ages, its spirit remains as vibrant as the day the maker gave the knife to the world. The spirit in their knives lives on long after the master craftsmen who made them.
In 1986 we introduced the KM-14T, our first knifemaking kiln. We are proud to announce the KM-18T, with an 18 long interior. It should be the perfect size furnace for those who need one that is between the 14 1/2 long KM-14T and the 24 long KM-24T. In addition, you can order Paragon furnaces in your choice of the economical 3-key Sentry Xpress temperature controller or the full 12-key Sentry. Click here for links to all the Paragon knifemaking furnaces.
Test exotic heat treating formulas
When you own a Paragon KM-18T furnace, you can live the knife making adventure to the fullest. You will actually witness the birth of your knives in the bright red heat of the furnace. The soul is born in the furnace, because the heat treating brings out the highest qualities of the steel.
Many knifemakers enjoy owning a furnace, because they can revel in testing. They put blades through tests more severe than any knife owner would dare. Yes, they test for Rockwell hardness, but they dont stop there. The serious knifemaker tests the knife against hemp rope and 2x4s. They bend the blade to 45° or even 90°. Then they straighten the blade, slap on a handle and test it in the real world.
The knife maker with a KM-series furnace can try exotic heat treating methods at his leisure. Does quenching in dry ice improve blade performance? What happens when 52100 steel is triple-quenched with a one-day wait between each quench? After this treatment, will a 52100 blade bend to 90° without chipping?
With a Paragon furnace in your shop, all questions about heat treating formulas are settled. Heat treating is no longer theory. You find out for yourself what works. Testing and heat treating is at the heart of the knife making adventure. Here is where your confidence as a knife maker takes root. Through heat treating, you can master a tool steel and make it your own.
Experiment with differential hardening, an ancient bladesmith technique. Try out the newest tool steels. Are they really as good as the tried and true D2 and A2?
New higher furnace temperatures
Paragons knifemaking furnaces are now rated to 2350 degrees F, so you can heat treat as hot as you need to.
A message from Ed Fowler, Master Blade Smith, (Member, American Bladesmith Society)
Paragon offered me no financial rewards or free equipment for this endorsement. I recommend Paragon furnaces only because they make an excellent, reliable product.
I've made knives off and on since the sixth grade. I enjoy every second in the shop making knives. I used to harden and temper with a torch. As my skills increased, my testing of knives revealed the benefit of longer and more uniform soak times during the annealing and tempering cycles than were possible with a torch.
I finally bought a Paragon furnace. It is extremely beneficial to bladesmithing, because it allows us to do things with our blades we couldn't do otherwise. If I had known how good they are, I would have bought one years before I did.
You don't want to introduce any variables into your blades by accident, and temperature is one such variable. With a Paragon, you know exactly what causes what and why. My advice to beginning knifemakers is to use the best equipment you can as soon as you can add it to your shop. I wasted a lot of time and energy trying to make knives with less than the best equipment for the job. Invest in quality equipment, learn how to use it right, and use your time seeking the best knife you can make.
Without my Paragon oven, I would have never made the discoveries about steel that Ive made. I love my Paragon. That Paragon sure made a big difference in my knife making. Any experiment I want to run is right there. If I want to change a heat treatment, I know exactly how. With every knife, I learn more.
Thermal cycles, commonly known as heat treating of blades, are the most significant single aspect contributing to the quality of a knifemakers blade. Knifemakers who wish to explore the absolute frontiers of the world of knives in search of the Excalibur of their dreams must have the ability to design thermal treatments specifically intended to push their steel to the highest limits of performance. Absolute control of the temperature of their blades is absolutely essential to success.
Paragon makes a nice piece of equipment. I recommend it very highly to anyone who asks and to many people who don't ask. In order to make knives that my customers can depend upon, I have to be able to count on my equipment to provide consistent performance. My Paragon heat treating oven has always provided the degree of dependability I can count on to support my commitment to provide my customers the best functional knife possible.
Believe me, I'm much richer knowing I'm making the best knife I can. I'm much happier with myself.
A bond of trust between you and the knife owner
The knifemakers credo is simple: to create a knife that represents the knife maker himself. Quality of work is not just a fad for him. It is a passion. Anything less than ones best is unthinkable.
The buyer of a custom knife appreciates fine detail. He or she marvels at the glistening curves the maker coaxed from the steel with such patience. There is a bond of trust between the owner of a fine knife and its maker. This is why the knife maker sleeps better when he controls every step in creating a knife.
The knife maker derives joy from working with his hands. He makes knives that are not merely prized, but treasured, sometimes for generations. When the knife owner sharpens it, he is caressing as much as cleaning it. Part of this spirit of knifemaking is lost when you send the blade out for heat treating and await its return.
Every time you, the maker, release one of your knives to the world, your reputation goes with it. Your reputation is engraved right into the blade for all the world to see. This is why makers feel compelled to control every step in the blades journey from initial design through final polishing.
No more waiting for commercial heat treating
A Paragon KM-series furnace sets the knife maker free. No more wrapping blades and shipping them to your heat treater. No more waiting until you have a dozen blades to get the best price on heat treating. No more turning away orders for last-minute gifts.
While your furnace is hardening and tempering blades, you can busy yourself grinding more knives or fitting handles. After youve used your Paragon furnace awhile, you will wonder how you ever got along without it. When asked to make a knife on short noticewhether for a Marine Corps awards presentation, a celebration or retirement party, or an archaeologist on his way to Africayou will be ready. When a custom knife is needed as a going away gift, and the recipient is leaving in three days, you will be ready. Your KM-series furnace might even pay for itself on rush orders you would otherwise have missed.
Own a furnace and you alone decide when you will complete a knife. If you stay up one Friday grinding a knife, you can heat treat it that evening and deliver it Saturday morning. Just in time for a grateful wife to present to her husband on his birthday.
Finishing a knife whenever you want will excite you. You will find yourself working into the night to complete a new design. When you send the blade out for heat treating, the excitement of making will be forgotten. By the time the blade returns, you hardly remember it.
A full range of Paragon furnace sizes
The KM-series knifemaking furnaces come in five interior sizes:
- KM-14T and Xpress-KM-14: 14 ½ long, 5 ½ wide, and 4 ¼ high
- KM-18T and Xpress-KM-18: 18 long, 5 ½ wide, and 4 ¼ high
- KM-24T and Xpress-KM-24: 24 long, 5 ½ wide, and 4 ¼ high
- KM-36T and Xpress-KM-36: 36 long, 5 ½ wide, and 4 ¼ high
- KM-45T: 45 long, 5 ½ wide, and 4 ¼ high
Most knives can fit inside the KM-14T. Our most popular size is the KM-24T. The KM-18T is the medium-length furnace that may be all the furnace you will ever need. On the other hand, it may be wise to choose a longer furnace than you currently need, because you wont be limited by furnace size. After all, it doesnt hurt to heat shorter blades in a longer furnace such as the KM-24T; electrical consumption is minimal.
Your choice of two temperature controllers
The Sentry 12-key controller is faster to program and has more features than the Sentry Xpress 3-key controller. However, the Sentry Xpress is more economically priced. Now you can choose the controller that fits your budget.
Models with the 3-key Sentry Xpress controller: Xpress-KM-14, Xpress-KM-18, Xpress-KM-24, Xpress-KM-36.
Models with the 12-key Sentry controller: KM-14T, KM-18T, KM-24T, KM-36T, KM-45T.
Solid furnace construction
The door swings open easily with one-handed operation. A counter-weight handle holds the door securely closed. The furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. The groove protects the element for long life and low maintenance, qualities that have made Paragon furnaces legendary. Elements are simple to replace because theyre exposed rather than embedded. You can thread new elements into the grooves following clear instructions in the manual.
The temperature sensor (thermocouple) is sheathed for long life. The thermocouple wire is kept inside the control box and out of the way for protection from the harsh environment of the typical bladesmith shop.
The firing chamber is protected by a rigid steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted on a heavy-duty hinge shaft for smooth opening and long wear. Because of the rigid case and heavy hinge, the door is sturdy enough for years of faithful service. A chain holds the door open and out of the way so you can remove hot blades without bumping into a swinging door.
A micro safety switch shuts off the power to the elements when the door is opened, yet the temperature controller remains powered. The safety switch is standard on Paragon KM furnaces. The KM-18D also includes an on/off toggle switch.
We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and slotted. Each furnace comes with a cord and plug for immediate installation, and a one year warranty.
Detailed heat treating instructions
Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner.
Made in America
45% of Paragons factory work force has been here over 10 years; 20% have worked here over 20 years. All paragon furnaces are made in America. We are proud to support the American worker.
Optional Gas Injection Flow Meter
During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. Another way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.
The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.
Please remember that results with the flow meter vary depending on the type of inert gas you use and your level of experience. For more details, click on the link in the Options section below.
The knifemaking Kit
In addition to the furnace, you will need a Knifemaking Kit, which separates the blades and holds them parallel inside the furnace. Please click the link below in the Options section.
Sentry Digital 12-key Non-Ceramic Control Type
Paragon digital kilns are powered by either the 12-key Sentry micro processor or the smaller 3-key Sentry Xpress. These micro processors are the result of intensive effort between Paragon Industries, L.P. and Orton Ceramic Foundation. The controllers add convenience and accuracy to your firings.
Owning a Sentry is like hiring an assistant to watch your kiln. Nevertheless, please remember that you should monitor the kiln occasionally during firing, especially near the expected shut-off. (We do not warrant against over-fires.)
Sentry 12-Key 2.0
Most Paragon ceramic kilns use the Sentry 12-key. Some of its exciting features:
The Sentry 2.0 can be installed on all existing Paragon 12-key digital kilns. It uses the same size faceplate as the earlier DTC 100 - 1000 series. Upgrade a switch-operated kiln with the wall-mount version.
The thermocouple senses temperature inside the kiln. The standard thermocouple on most Paragon kilns equipped with the Sentry 2.0 is the ¼ Type-K. It is hermetically sealed in a metal sheath for long life. It replaces the earlier 1/8 thermocouple.
Though a precision instrument, the thermocouple wears with use, resulting in a gradual shift in temperature readout. (This wear occurs mostly above 2000°F.) If you fire pottery, consider the deluxe Type-S, noted for its extreme longevity.
Ramp-Hold Custom Programming
Ramp-Hold allows you to infinitely adjust each part of the firing cycle. Vary the firing to obtain different effects from the same glaze.
Ramp-Hold programs are made of segments. Each segment has a temperature, firing rate, and, if desired, a temperature hold.
The Auxiliary Output is available on most Paragon TnF kilns. The AOP is a relay-powered electrical receptacle mounted to the kiln. You can plug an Orton KilnVent into the AOP to control when the vent operates during firing.
Three Zone Firing
Standard TnF kilns are single zone; 3 zone is optional on 10- and 12-sided TnF kilns. Three zone is now faster and more accurate than on previous 3 zone controllers because of the Sentrys time-temperature algorithm. This eliminates the temperature lag adjustment.