Paragon KM45T Furnace W5.5"xD45"xH4.25" Sentry Digital 12key
IMPORTANT NOTES ON ORDERING:
These are shipped directly from Paragon. Lead time is 4-6 weeks.
When checking out, the shipping charges in the shopping cart are not accurate!
To find out the shipping you can contact us via email. Please send your shipping address, which oven and the best way to contact you. We will get the quote from Paragon and get back to you. Or you can call us at 507-720-6063 and we will get a quote for you.
If you would like you can go through the website to make the purchase and add a note as to the best way to reach you for the final shipping price. We will then contact Paragon to get the price and then let you know the price.
Test Exotic Heat Treating Formulas
When your Paragon KM-45T furnace arrives, you will begin to live the knife making adventure more fully. Now you can join that elite corps of knife makers who witness the birth of the knife. In the bright red heat of the furnace, the soul of the knife is born.
Many furnace owners revel in testing. They put blades through tests more severe than any knife owner would dare. They test for Rockwell hardness, but they dont stop there. They count the number of cuts a knife makes on hemp rope. They measure the foot-pounds of torque required to bend the blade to 45° or even 90°. Then they straighten the blade, slap on a handle and test it in the real world.
The knife maker with a KM-series furnace can try exotic heat treating methods at his leisure. Does quenching in dry ice improve blade performance? What happens when 52100 steel is triple-quenched with a one-day wait between each quench? After this treatment, will a 52100 blade bend to 90° without chipping? What if you freeze the steel between quenches?
With a Paragon furnace in your shop, all questions about heat treating formulas are settled. You find out for yourself what works and what doesnt. Testing and heat treating is at the heart of the knife making adventure. Here is where your confidence as a knife maker takes root.
A message from Ed Fowler, Master Blade Smith, (Member, American Bladesmith Society)
Paragon offered me no financial rewards or free equipment for this endorsement. I recommend Paragon furnaces only because they make an excellent, reliable product.
I've made knives off and on since the sixth grade. I enjoy every second in the shop making knives. I used to harden and temper with a torch. As my skills increased, my testing of knives revealed the benefit of longer and more uniform soak times during the annealing and tempering cycles than were possible with a torch.
I finally bought a Paragon furnace. It is extremely beneficial to bladesmithing, because it allows us to do things with our blades we couldn't do otherwise. If I had known how good they are, I would have bought one years before I did.
You don't want to introduce any variables into your blades by accident, and temperature is one such variable. With a Paragon, you know exactly what causes what and why. My advice to beginning knifemakers is to use the best equipment you can as soon as you can add it to your shop. I wasted a lot of time and energy trying to make knives with less than the best equipment for the job. Invest in quality equipment, learn how to use it right, and use your time seeking the best knife you can make.
Without my Paragon oven, I would have never made the discoveries about steel that Ive made. I love my Paragon. That Paragon sure made a big difference in my knife making. Any experiment I want to run is right there. If I want to change a heat treatment, I know exactly how. With every knife, I learn more.
Thermal cycles, commonly known as heat treating of blades, are the most significant single aspect contributing to the quality of a knifemakers blade. Knifemakers who wish to explore the absolute frontiers of the world of knives in search of the Excalibur of their dreams must have the ability to design thermal treatments specifically intended to push their steel to the highest limits of performance. Absolute control of the temperature of their blades is absolutely essential to success.
Paragon makes a nice piece of equipment. I recommend it very highly to anyone who asks and to many people who don't ask. In order to make knives that my customers can depend upon, I have to be able to count on my equipment to provide consistent performance. My Paragon heat treating oven has always provided the degree of dependability I can count on to support my commitment to provide my customers the best functional knife possible.
Believe me, I'm much richer knowing I'm making the best knife I can. I'm much happier with myself.
A bond of trust
The knife makers credo is simple: to create a knife that represents the knife maker himself. Quality of work is not just a fad for him. It is a passion. Anything less than ones best is unthinkable.
The buyer of a custom knife appreciates fine detail. He or she marvels at the lines and curves the maker coaxed from the steel with such patience. There is a bond of trust between the owner of a fine knife and its maker. This is why the knife maker sleeps better when he controls every step in creating a knife.
The knife maker derives joy from working with his hands. He makes knives that are not merely prized, but treasured. When the knife owner wipes a rag across such a knife, he is caressing as much as cleaning it. Part of this spirit of knife making is lost when you send the blade out for heat treating and await its return. Every time you, the maker, release one of your knives to the world, your reputation goes with it. This is why makers feel compelled to control every step in the blades journey from initial design through final polishing.
No more waiting
A Paragon KM-series furnace sets the knife maker free. No more wrapping blades and shipping them to your heat treater. No more waiting until you have a dozen blades to get the best price on heat treating. No more turning away orders for last-minute gifts.
While your furnace is hardening and tempering blades, you can busy yourself grinding more knives or fitting handles. After youve used your Paragon furnace awhile, you will wonder how you ever got along without it. When asked to make a knife on short noticewhether for a Marine Corps awards presentation, a soldiers pre-deployment party, or an archaeologist on his way to Africayou will be ready. When a custom knife is needed as a going away gift, and the recipient is leaving in three days, you will be ready. Your KM-series furnace might even pay for itself on rush orders you would otherwise have missed.
Own a furnace and you alone decide when you will complete a knife. If you stay up one Friday grinding a knife, you can heat treat it that evening and deliver it Saturday morning. Just in time for a grateful wife to present to her husband on his birthday.
Finishing a knife whenever you want will excite you. You will find yourself working into the night to complete a new design. When you send the blade out for heat treating, the excitement of making it is forgotten. By the time the blade returns, you hardly remember it.
The KM-14T, KM-24T and KM-36T & KM-45T
The KM-series furnace comes in four interior sizes:
- KM-14T: 14 ½ long, 5 ½ wide, and 4 ¼ high
- KM-24T: 24 long, 5 ½ wide, and 4 ¼ high
- KM-36T: 36 long, 5 ½ wide, and 4 ¼ high
- KM-45T: 45 long, 5 ½ wide, and 4 ¼ high
Even if most of your knives would fit inside the KM-14T, you may ultimately be happier with the KM-24T, the most popular size. Too much capacity may be better than too little. After all, it doesnt hurt to heat shorter blades in the longer KM-24T; electrical consumption is minimal. The KM-24T is priced only slightly higher than the KM-14T. Just knowing you could make a larger blade when you wanted may be worth the extra cost of the KM-24T.
The door swings open with one-handed operation. A counter-weight handle holds the door securely closed. The furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because theyre exposed rather than embedded. You can thread new elements into place following clear instructions in the manual.
The firing chamber is protected by a steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered. Each furnace comes with a cord and plug for immediate installation, and a one year warranty.
Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner.
Optional Gas Injection Flow Meter
During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. Another way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.
The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.