Customer Service (507) 720-6063

Welcome guest! Please sign in to save your wishlists and cart.

Corby Bolt - Aluminum - SMALL .140" shaft .187" shoulder *NEW SHAFT LENGTH

Corby Bolt - Aluminum - SMALL .125" shaft .187" shoulder

Corby Bolt - Aluminum - SMALL .140" shaft .187" shoulder *NEW SHAFT LENGTH


Availability: In stock



Corby Style Bolts

  • .140" Shaft .235" long shaft

  • .187" Shoulder .230" long shoulders

  • .240" long thread

  • Over all length is 1", OAL max length is 1.15"

  • Aluminum - Super light for when every bit of weight matters

  • both ends slotted

  • Use these Corby style bolts to connect handles to a knife tang. For a full tang knife:

    • You drill a hole in the tang the size of the shaft. Then you drill holes part way through the handle material the diameter of the shoulder.

  • For a hidden tang knife:

    • Dry mount your handle to the hidden tang so it doesn't move. Drill a hole through both handle and tang in one pass. Then drill the handle material partially to depth the diameter of the shoulder.

  • Screw the two parts together fastening the scales to the tang. The ends of the bolts are slotted so you can use a screw driver on both ends to tighten the bolt. When you have it tight, you grind off the excess bolt material leaving a nice pin showing. You can also grind the shaft and/or threads to shorten them up. The shoulder and shaft are almost certainly longer than the thickest handle/tang combination.

  • We have these custom made exclusively for us. 

NOTE: These are sold in single bolts. You will probably need to order 2 of these for a typical knife handle. You are ordering one each as shown above in the description.

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Shelf Location: H1.6