Ti Liners that match our Template Patterns
Material: Ti 6al-4v
Width: 1.5" at the widest
These Titanium liners (6al-4v) match our drill template patterns located here: http://usaknifemaker.com/kms-large-folding-knife-template.html
NOTE: We missed locating and drilling the detent hole in this batch. Locate the hole (#49 for 2mm ball, #53 for a 1/16" detent ball) 1/8" in from the lock face and 1/8" down from the top of the lock bar.
These liners are waterjet cut to a very high quality. The holes have been precision reamed.
Made in the USA
What you get: a pair of liners for use with our template&drill patterns.
Why these: using a pair of these saves you the step of profiling, locating and drilling the holes.
Why so much: Titanium isn’t cheap. These are USA made, waterjet cut with a high quality finish, drilled and reamed to exact hole size.
Why use them: you will save a lot of time and have a great head start on making a high quality liner lock.
Why no blade is included: The blade is significantly easier and we simply couldn’t get all the different steels available in time for this run. We’ll have blade blanks done in our next batch.